
Intel 的 1976 年 8048 微控制器如今迎来了第二春:它被改造成一款复古会议胸牌,配有定制开发板和滚动 LED 显示。
过去 50 年来,微控制器取得了长足的发展。如今的芯片以仅几美元的价格,就能在封装中集成强大的处理器、充足的存储器以及无线连接功能。早在 1976 年,Intel 推出了 8048——一款 8 位微控制器,它为我们今天使用的嵌入式系统奠定了基础。创客 mwfeurtado 决定重温这段计算历史:以原始芯片为核心制作一块开发板,再将其变成一枚复古会议胸牌。
Intel 8048 属于 MCS-48 系列,这是 Intel 的第一条微控制器产品线。它配备 8 位处理器、27 个 GPIO 引脚、外部数据总线,时钟频率最高可达 11 MHz。与如今具备可重复编程闪存的微控制器不同,最初的 8048 使用掩膜 ROM,其程序在制造过程中写入。这种特性并不适合实验,但 Intel 提供了一种绕过该限制的方法。
通过配置 External Access(EA)引脚,MCS-48 芯片可以执行存储在外部存储器中的程序,而不必使用内部 ROM。这一能力正是 mwfeurtado 开发板的核心:它使用外部 EEPROM 来存放固件。一颗 SN74HC573 8 位锁存器负责地址解复用,使微控制器能够通过其共享的地址与数据总线访问外部程序存储器。
这块板子还包含一颗 Intel 8155 RAM 与 I/O 扩展芯片、一颗 8 MHz 晶振,以及一颗 7805 稳压器。一个 40 针 RCBUS 连接器提供额外的扩展能力,使开发板可以与外部硬件对接。
这种自制开发板本身已足以吸引复古计算爱好者,但 mwfeurtado 还希望做出能在 Vintage Computer Festival Southwest 上真正引人注目的作品。解决方案是:用一对复古 LED 字符显示器,把这块板子变成一枚会议姓名胸牌。
这两块显示器是 OSRAM SLY2016 模块,每块可显示四个字符,采用 5×7 黄色 LED 点阵。它们接收 7 位 ASCII 数据,因此与 8 位微控制器对接相对直接。
为了不额外添加地址译码逻辑,mwfeurtado 将显示器直接连接到 8155 扩展芯片上的 GPIO 引脚。通过独立的写信号在两块四字符显示器之间进行选择,从而提供八个字符的输出。
显示器固定在一小块万用板上,采用手工布线连接,并接到开发板的扩展接口。硬件完成后,mwfeurtado 编写了汇编例程,用于清屏并循环显示多条信息。
首次上电时,胸牌会以滚动文字自我介绍:“Hello! My Name is MCS-8048 1976 Intel MCU.”它或许没有现代会议胸牌那样的处理性能或华丽图形,但在一场复古计算活动中使用一款 50 年前的微控制器,确实很有恰到好处的味道。
本文来源:https://www.hackster.io/news/a-conference-badge-powered-by-a-piece-of-computing-history-66b6f9a0d2f2
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Intel's 1976 8048 microcontroller gets a second life as a retro conference badge with a custom development board and scrolling LED display.
Microcontrollers have come a long way over the past 50 years. Modern chips pack powerful processors, plenty of memory, and wireless connectivity into packages that cost just a few dollars. Back in 1976, Intel introduced the 8048, an 8-bit microcontroller that helped lay the groundwork for the embedded systems we use today. Maker mwfeurtado decided to revisit that piece of computing history by building a development board around the original chip, then turning it into a retro conference badge.
The Intel 8048 was part of the MCS-48 family, Intel's first microcontroller lineup. It featured an 8-bit processor, 27 GPIO pins, an external data bus, and clock speeds reaching 11 MHz. Unlike modern microcontrollers with reprogrammable flash memory, the original 8048 contained a mask ROM that was programmed during manufacturing. That wasn't particularly convenient for experimentation, but Intel provided a way around the limitation.
By configuring the External Access (EA) pin, MCS-48 chips could execute programs stored in external memory instead of their internal ROM. This capability is central to mwfeurtado's development board, which uses an external EEPROM to hold its firmware. An SN74HC573 8-bit latch handles address demultiplexing, allowing the microcontroller to access external program memory through its shared address and data bus.
The board also includes an Intel 8155 RAM and I/O expansion chip, an 8 MHz crystal, and a 7805 voltage regulator. A 40-pin RCBUS connector provides additional expansion capabilities, allowing the board to interface with external hardware.
A custom development board of this sort is interesting enough for retrocomputing enthusiasts, but mwfeurtado wanted something that would really stand out at the Vintage Computer Festival Southwest. The solution was to turn the board into a conference name badge using a pair of vintage LED character displays.

The displays are OSRAM SLY2016 modules, each capable of showing four characters using 5×7 yellow LED matrices. They accept 7-bit ASCII data, making them relatively straightforward to interface with an 8-bit microcontroller.
Rather than adding extra address-decoding logic, mwfeurtado connected the displays directly to GPIO pins on the 8155 expansion chip. Separate write signals select between the two four-character displays, providing eight characters of output.
The displays were mounted on a small piece of perfboard, hand-wired, and connected to the development board's expansion header. With the hardware complete, mwfeurtado wrote assembly routines to clear the displays and cycle through messages.
When first powered up, the badge introduces itself with scrolling text reading "Hello! My Name is MCS-8048 1976 Intel MCU." It may not have the processing power or flashy graphics of modern conference badges, but there's something fitting about using a 50-year-old microcontroller at a vintage computing event.