IT之家 10 月 31 日消息,据外媒 TechSpot 今天(31 日)晚间报道,香港工具品牌 Arrowmax 在 Kickstarter 推出了一款号称全球首创的 AI 电动螺丝刀 S1,众筹项目启动后不到 24 小时便达成目标。机型起售价 80 美元(IT之家注:现汇率约合 533.6 元人民币),预计 2027 年 4 月开始发货。
S1 希望借助 AI 简化螺丝刀的使用流程,从识别螺丝、挑选批头到调节扭矩,都能交由平台辅助完成。
S1 的机身尾部装有一根接触探针,使用时只需将探针抵住螺丝头,就能让摄像头与螺丝保持合适的拍摄距离,再由高清摄像头拍下螺丝头的图像。
拍摄完成后,AI 模型会识别螺丝的尺寸和形状。Arrowmax 称,模型使用了数万张真实情形照片开展训练,所有训练样本均由自家工程团队采集,没有使用外部训练数据。
使用者还可以借助配套手机应用查看摄像头画面,并调节扭矩、档位等参数。螺丝刀借助本地连接与手机通信,不需要联网即可使用。
识别出螺丝后,平台会在配套智能收纳盒中点亮对应批头的存放位置,同时自动调整螺丝刀的扭矩。使用者不必再逐个尝试批头,也能降低因批头不匹配或扭矩过大而拧坏螺丝的风险。
S1 配有一块 OLED 显示屏,用于表明剩余电量、扭矩设置和旋转方向。其内置 600mAh 锂聚合物电池,电池续航时间约 90 分钟,按扭矩设置不同,最多可拧动约 900 颗螺丝。扭矩调节范围为 1 至 10kgf·cm。机身尾部设有 USB-C 充电接口,充满电约需 70 分钟。
S1 单机售价 80 美元起,附带智能收纳盒和 52 枚批头的套装早鸟价为 129 美元(现汇率约合 860.4 元人民币)起。众筹于 10 月 20 日上线,仅用 24 小时就完成了筹资目标,当下筹款金额已超过目标十倍。
其他配件还涵盖 18 美元(现汇率约合 120.1 元人民币)的直角转接头、每套 24 美元(现汇率约合 160.1 元人民币)的两套批头转换套装,以及 40 美元(现汇率约合 266.8 元人民币)的迷你台钳。
本文来源:https://www.ithome.com/1/020/593.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT Home, October 31 — According to a TechSpot report tonight (the 31st), Hong Kong tool brand Arrowmax has launched the S1, billed as the world's first AI-powered electric screwdriver, on Kickstarter. The crowdfunding campaign hit its goal within 24 hours. The device starts at USD 80 (IT Home note: about CNY 533.6 at current exchange rates) and is scheduled for shipment in April 2027.
The S1 aims to use AI to streamline the screwdriver workflow, letting the platform assist with recognizing screws, selecting bits, and adjusting torque.
A contact probe is built into the tail of the S1. During use, simply press the probe against the screw head to keep the camera at an appropriate distance, and the high-definition camera captures an image of the screw head.
After capture, an AI model identifies the screw's size and shape. Arrowmax says the model was trained on tens of thousands of real-world photos, all collected by its in-house engineering team, with no external training data used.
Users can view the camera feed in the companion mobile app and adjust parameters such as torque and speed settings. The screwdriver communicates with the phone via a local connection and does not require an internet connection to operate.
Once the screw is identified, the platform lights up the corresponding bit compartment in the companion smart storage case and automatically adjusts the screwdriver's torque. Users no longer need to try bits one by one, and the risk of damaging screws due to mismatched bits or excessive torque is reduced.
The S1 features an OLED display that shows remaining battery, torque setting, and rotation direction. It houses a 600mAh lithium-polymer battery providing about 90 minutes of runtime and can drive up to approximately 900 screws depending on torque settings. Torque is adjustable from 1 to 10 kgf·cm. A USB-C charging port is located at the rear, and a full charge takes about 70 minutes.
The S1 is available from USD 80 as a standalone unit, while an early-bird bundle including the smart storage case and 52 bits is priced from USD 129 (about CNY 860.4 at current exchange rates). The campaign went live on October 20 and reached its funding target within just 24 hours; funding now exceeds the goal by ten times.
Other accessories include a right-angle adapter for USD 18 (about CNY 120.1), two bit-conversion sets priced at USD 24 each (about CNY 160.1 per set), and a mini bench vise for USD 40 (about CNY 266.8).


