DIY 追踪方案让 VR 头显甩掉基站VR Headset Ditches the Base Stations with DIY Tracking


AI free token/AI免费积分
DIY 追踪方案让 VR 头显甩掉基站

虚拟现实领域的人士或许对[Prohurtz]为Bigscreen Beyond VR头显推出的加装组件感兴趣。BSB-SLAM通过在头显前方附加一枚传感器,并提供配套软件将二者整合,从而为该头显增加SLAM(同步定位与建图)追踪功能。这样一来,头显即可在3D空间中实现完整追踪,无需外部基站。其本质是通过DIY外设的方式为头显带来inside-out追踪能力。需要说明的是,这并不意味头显本身变为无线。Beyond仍像之前一样连接至PC,主要充当显示设备,这一连接方式保持不变。但这确实意味着用户不再受必须在预先安装基站的房间内使用的限制。

[Prohurtz]的解决方案是给该装置添加一块小型现成Xvisio XR50板、一条USB线缆,以及一个3D打印固定支架。头显仍可正常工作,只需额外安装软件即可利用传感器数据取代基站完成定位。从传感器角度来看,Xvisio XR50的售价略高,但一款体积小、重量轻、能够提供近实时头显定位所需数据的SLAM传感器,居然可以在网上直接购买并如此易于改装,这一点相当有趣。

[Prohurtz]早在2025年就萌生了该想法,如今用户已可直接订购零件、自行打印适配支架,并借助软件包快速上手。此外,这并非[Prohurtz]首次涉足VR硬件领域。EyeTrackVR眼动追踪插件同样出自其手,该方案将大部分现成硬件整合成一套高效的VR DIY解决方案。

本文来源:https://hackaday.com/2026/10/30/vr-headset-ditches-the-base-stations-with-diy-tracking/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Those in the virtual reality scene might be interested in [Prohurtz]’s add-on for the Bigscreen Beyond VR headset. BSB-SLAM adds SLAM (Simultaneous Localization and Mapping) tracking to the headset by attaching a sensor to the front of the headset, and providing the software to tie the two together. As a result, the headset can be fully tracked in 3D space with no need for external base stations. It essentially adds inside-out tracking as a DIY add-on.

Just to be clear, that doesn’t mean the headset becomes wireless. The Beyond connects to a PC, essentially acting as a display, and that part is the same. But it does mean the headset is no longer tied to having to work in a room with base stations pre-installed.

[Prohurtz]’s solution does this by adding a small off-the-shelf Xvisio XR50 board, USB cable, and 3D-printed mount to the unit. The headset works as normal, just with some extra software needed to use the sensor data in lieu of the base stations.

As far as sensors go the Xvisio XR50 is a bit spendy, but the fact that a small and lightweight SLAM sensor that’s capable of delivering positioning data suitable for tracking a headset in near real-time can be bought online and so readily adapted is pretty interesting.

VR Headset Ditches the Base Stations with DIY Tracking

[Prohurtz] got the idea working back in 2025 but it’s now at the point where one can order a part, print an adapter, and be off to the races with a software package.

This isn’t [Prohurtz]’s first time with VR hardware, either. The EyeTrackVR eye tracking add-on is also their work, combining largely off-the-shelf hardware into an effective DIY solution for VR use.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry