
Hackaday 报道,约 15 美元的廉价 FPGA 开发板 Tang Nano 9K 被爱好者改装成了一台复古风格电脑。
该板基于 Gowin GW1NR-9C FPGA(仅 8640 个 LUT),却足以跑起一颗 36MHz 的 RISC-V CPU,并板载 8MB RAM、HDMI、48kHz 立体声音频、两个 USB 口与 SD 卡读卡器。
作者已在该平台上移植《Doom》《Tyrian》《System Shock》《Ultima VII》等 90 年代经典游戏,在 720×480 分辨率下达到可玩帧率。
文章详细拆解了把这些游戏移植到该平台所需的取舍与工程挑战——对初次上手 FPGA 的开发者而言,是极佳的学习项目。
本文来源:https://hackaday.com/2026/11/01/cheap-fpga-board-becomes-retro-style-computer/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
The Tang Nano 9K is a cheap FPGA development board that can usually be acquired for around $15 or so. [ThePartsBin] has been experimenting with this hardware and figured out how to set it up as a retro-style computer.
The board is based around the Gowin GW1NR-9C FPGA which only has 8,640 LUTs. However, that’s enough to spin up a 36 MHz RISC-V CPU, and there’s 8 MB of RAM on tap, along with HDMI, 48 kHz stereo audio output, two USB ports, and an SD card reader. Combine all that together, and you’ve got a machine capable of playing a whole raft of classic 1990s games.
[ThePartsBin] ported Doom, Tyrian, System Shock and Ultima VII, all of which run at a playable speed at a tasty 720 x 480 resolution. The writeup does a great job of explaining what it took to actually implement these classic games on the platform. Tons of compromises were made along the way, but that’s the engineering challenge, isn’t it?

If you’re looking to play retro games, this is not really the fastest or cheapest way to do it. You could probably just emulate them on the machine you’re using to read this very website. If you’re trying to get to grips with a new FPGA board for the first time, though, projects like this can be a very useful learning experience indeed .