
如果你没听过 Static Radio,它本质上是一个由播客内容组成的在线广播电台。[Brendan Fitzpatrick] 决定拿一台 2009 年的老 Chumby One,把它改造成一台收听 Static 电台的"家电"。
做法是编写一个能在 Chumby 那颗 454MHz ARM9 处理器上运行的原生 C 语言 Static Radio 客户端。这台设备没有 FPU、只有 60MB 内存、运行 Linux 2.6.28,算不上什么时新平台,但 Brendan 还是让它跑起来了。
该客户端从 U 盘启动,不触碰 Chumby 自身的原厂固件。Brendan 打包进了 mbedTLS,因为 Chumby 原厂系统搭载的是 2004 年的 OpenSSL 0.9.7,放在今天根本不够用。他还加入了定点 Helix MP3 解码器,以及 HE-AAC 和多相重采样器来处理声音,音频流通过内核的 ALSA PCM 设备输出。
客户端不仅缓冲当前电台,还同时缓冲"调谐盘"上相邻的两家电台,这样拧旋钮切换电台时就能得到干净的交叉淡入淡出过渡。
如果你手边正躺着一台吃灰的 Chumby,这或许正是让它重新上岗的完美方式。我们此前也介绍过针对这款经典硬件的其他改造。
本文来源:https://hackaday.com/2026/11/02/static-radio-for-the-chumby-one/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
If you haven't heard of Static Radio, it's basically an online radio station made up of podcast content. Brendan Fitzpatrick decided to take an old 2009 Chumby One and turn it into an appliance for tuning in to Static.
This was achieved by creating a native C Static Radio client that could run on the Chumby's 454 MHz ARM9 CPU. It's got no FPU, only 60 MB of RAM, and runs Linux 2.6.28, so it's not exactly the most up to date platform out there. But nevertheless, Brendan was able to make it work.
The client starts from a USB stick, without touching the original firmware on the Chumby itself. Brendan bundled in mbedTLS, since the stock Chumby OS shipped with OpenSSL 0.9.7 from 2004, which simply doesn't cut it today. He also threw in a fixed-point Helix MP3 decoder along with HE-AAC and a polyphase resampler to handle sound, with the audio stream piped out to the kernel's ALSA PCM device.

The client is set up to buffer not only the current station, but the two neighbouring stations on the dial as well, so that turning the knob to switch stations comes with a clean crossfade transition.
If you've got a Chumby sitting around doing nothing, this could be the perfect way to put it back to work.