Lumissil IS31CS9202/IS32CS9202 Cortex-M0+ MCU 集成串行视频总线 SBV 与 LumiBusLumissil IS31CS9202/IS32CS9202 Cortex-M0+ MCUs Integrate Serial Video Bus (SBV), LumiBus


AI free token/AI免费积分
Lumissil IS31CS9202/IS32CS9202 Cortex-M0+ MCU 集成串行视频总线 SBV 与 LumiBus

Lumissil Microsystems 的 IS31CS9202 和 IS32CS9202 是两款主频达 50 MHz 的 Cortex-M0+ 微控制器,面向工业、消费及汽车应用领域,集成了串行视频总线(SVB)、LumiBus LED 控制器以及电容式触摸按键控制器。

这两款芯片均配备 16KB RAM、256KB 闪存、CAN FD 控制器、SPI 主/从接口、I2C 主/从接口、双增强型 UART 接口、正交编码器、14 位 Sigma-Delta ADC、12 位 SAR ADC、8 位 DAC 以及多达 42 个 GPIO 引脚等丰富资源。两者的唯一区别在于,IS32CS9202 专为汽车应用打造,支持更宽的 -40°C 至 125°C 温度范围,并具备 AEC-Q100 和 ASIL-B 认证资质。

Lumissil IS31CS9202/IS32CS9202 主要特性与规格:

IS31CS9202(及 IS32CS9202)功能框图

LumiBus 控制器是 Lumissil 的一项定制特性,能够通过单一通信通道支持多达 256 个外部可寻址 RGB LED。触摸按键控制器具备 24 位分辨率,在 32 引脚封装下最多支持 25 个按键,在 48 引脚封装下最多支持 39 个按键。

该公司为 IS3xCS92 系列提供了 C 语言示例代码,用于演示定时器、看门狗、GPIO、TCC、PWM、ADC、ACMP、DAC、I2C、SPI、CAN 总线、触摸按键控制器及 LumiBus 等外设的使用方法。开发工作可在 Windows 10/11 环境下,借助 Arm Keil MDK 或 Lumissil 32 位 MCU IDE(IMSC)进行。

IS31CS9202 EBGUI 板,IS31CS9202 板连接触摸按键板。

该公司还提供用于评估的 IS31CS9202 EBGUI 板。该板基于 IS31CS9202 微控制器,具备两个触摸板接口、未焊接的 GPIO 引脚、一个 UART 端口、一个 JTAG 连接器、一个复位按钮、一个电源指示灯、一对跳线,以及两个晶振(16/32MHz 和 RTC)。

产品页面提供了详尽的技术文档。您需要注册才能访问大多数文件,但过程非常简单。我在撰写本文时就完成了注册,只需一个电子邮件地址即可。无需人工确认,注册后您即可获取数据手册、评估板文档和原理图、固件开发工具、源代码以及开发工具。该板的主要缺点是,您需要一台 Windows 开发机才能配合其进行开发工作。

Lumissil 32 位 MCU IDE (IMSC) 截图——系统时钟配置界面

汽车级型号主要针对中控台、娱乐控制台、无钥匙进入、后备箱控制以及供暖与空调系统等应用,而工业/消费级版本则适用于人机界面 (HMI)、触摸控制以及不需要汽车级认证和温度范围的 RGB LED 应用。

我之所以撰写关于这些 Cortex-M0+ 微控制器的文章,其中一个原因是我之前从未听说过 Lumissil Microsystems,而且多一个选择总归是件好事。该公司自称拥有 15 年以上的制造经验,在作为独立法人实体运营之前,它曾是 ISSI 集团内部的模拟与混合信号部门。其总部位于美国,但在中国大陆设有多个办事处,在台湾和以色列各设有一个办事处。

目前似乎尚未公布 IS31CS9202 和 IS32CS9202 的定价信息,目前您只能申请样品。更多详细信息可参阅产品页面和新闻稿。

Jean-Luc 于 2010 年创办了 CNX Software,当时这仅是一份副业。后来他辞去了软件工程经理的工作,并于 2011 年晚些时候开始全职撰写每日新闻和评测。

请支持 CNX Software!您可以通过加密货币进行捐赠、成为 Patreon 的赞助者,或在亚马逊与速卖通上购买商品。此外,我们文章中还使用了联盟营销链接,如果您点击这些链接并完成购买,我们将从中赚取佣金。

本文来源:https://www.cnx-software.com/2026/11/12/lumissil-is31cs9202-is32cs9202-cortex-m0-mcus-integrate-serial-video-bus-sbv-lumibus-and-capacitive-touch-key-controller/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Lumissil Microsystems IS3 1 CS9202 and IS3 2 CS9202 are 50 MHz Cortex-M0+ microcontrollers for industrial, consumer, and automotive applications with a serial video bus (SVB), a LumiBus LED controller, and a capacitive touch-key controller.

Both chips come with 16KB RAM, 256KB flash, a CAN FD controller, SPI master/slave, I2C master/slave, two enhanced UART interfaces, a quadrature encoder, a 14-bit sigma-delta ADC, a 12-bit SAR ADC, an 8-bit DAC, up to 42 GPIO pins, and more. The only differences are that the IS3 2 CS9202 is designed for automotive applications and benefits from a wider -40°C to 125°C temperature range and AEC-Q100 and ASIL-B qualifications.

Lumissil IS31CS9202/IS32CS9202 key features and specifications:

IS31CS9202 (and IS32CS9202) block diagram

The LumiBus controller is a custom feature from Lumissil that supports up to 256 external addressable RGB LEDs over a single communication channel. The touch-key controller provides 24-bit resolution and supports up to 25 keys in 32-pin configurations or 39 keys in 48-pin configurations.

The company provides sample code (C language) for its IS3xCS92 Series to demonstrate how to use peripherals such as timers, watchdog, GPIO, TCC, PWM, ADC, ACMP, DAC, I2C, SPI, CAN bus, touch-key controller, LumiBus, and so on. Development is done through Arm Keil MDK or the Lumissil 32-bit MCU IDE (IMSC) on Windows 10/11.

IS31CS9202 EBGUI board IS31CS9202 board connected to touch-key boards

The company also provides the IS31CS9202 EBGUI board for evaluation. It’s based on an IS31CS9202 microcontroller, and features two touch board interfaces, unpopulated GPIO headers, a UART port, a JTAG connector, a Reset button, a power LED, a couple of jumpers, and two crystals (16/32MHz and RTC).

Thorough documentation is available through the product page. You’ll need to register to access most files, but it’s quite straightforward. I did it as I wrote this article, and you just need an email. No manual confirmation is needed, and you can then get access to the datasheet, eval board documentation and schematic, firmware development tools,  source code, and development tools. The main downside is that you need a Windows development machine to work with the board.

Lumissil 32-bit MCU IDE (IMSC) screenshot – System Clock Configuration interface

The automotive variant targets applications requir such as center-stack controls, entertainment consoles, keyless entry, trunk control, and heating and air-conditioning systems, while the industrial/consumer version is made for HMI, touch-control, and RGB LED applications that don’t require automotive qualifications and temperature range.

One of the reasons why I wrote about these Cortex-M0+ microcontrollers is because I had never heard of Lumissil Microsystems, and it’s always good to have extra options. The company claims to have 15+ years of manufacturing experience, and used to be the analog and mixed-signal division within the ISSI Group before operating as an independent legal entity. They are headquartered in the US, but have several offices in mainland China, one in Taiwan, and one in Israel.

Pricing for the IS31CS9202 and IS32CS9202 doesn’t seem to be available right now, and all you can do is request samples. Additional information may be found on the product page and in the press release .

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies , become a Patron on Patreon, or purchase goods on Amazon or Aliexpress . We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry