
本文来源:https://post.m.smzdm.com/p/a4q48n8l
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
11月17日深夜,B站一晚上冒出两条全反射屏的点亮视频。一条把4.2寸四色屏接上ESP32-S3,白、青、红、黑四色全部点亮;另一条给一台拼音机换了主控,配的是黑白全反射屏。 哔哩哔哩 哔哩哔哩
这块屏叫RLCD,全反射式液晶:不靠背光,全靠环境光反射成像。它最早在护眼 手机 改装圈里流通,那边讨论得最多的是晚上没有光该怎么办。直到最近,它才变成DIY桌面的新宠。 小红书 哔哩哔哩 小红书
这是评论区被问得最多的一句。墨水屏是 刷一下就定住 :静止几乎不耗电,代价是刷新慢、有残影、灰阶靠抖动硬凑。全反射屏是 一直亮着 :本质还是液晶,社区教程里已经能跑仪表盘、弹跳动画、星空、生命游戏,还带帧率测试。 哔哩哔哩
代价只有一条,但很致命——它自己不发光。灯一关,就是一块白板。
别把它当“更好的墨水屏”,它是“不用背光的LCD”。
微雪 ESP32-S3-RLCD-4.2 是最省事的入口:4.2寸、300×400,ESP32-S3带WiFi和蓝牙,板载音频编解码电路、双 麦克风 、喇叭、SHTC3高精度温湿度传感器、MicroSD卡槽、RTC接口和 电池 充放电管理电路,官方写明支持AI语音、可刷小智。 哔哩哔哩
到手价,评论区晒的是不带电池140元、带电池150元,小红书的复刻帖也直接把它归进“百元级别”。 哔哩哔哩 小红书
裸屏也有得买,乐康显示、鱼鹰光电都在出,尺寸从1.54寸到4.2寸,驱动芯片是ST7305(单色)和ST7306(四色)。 哔哩哔哩 哔哩哔哩
轮子也不算少:u8g2移植、ESP-IDF驱动、Linux DRM内核驱动都有人 开源 ,立创开源硬件平台上还能找到ST7305反射式TFT的转接板。但第一次玩,还是建议直接上成品板——裸屏省下的钱,会在FPC排线和驱动调试上连本带利还回去。 哔哩哔哩
小红书有个帖子标题就叫“会议多的人,真的需要这块小屏幕”,1046赞、891收藏,屏上显示的是今天的会议、天气、室内温湿度、电脑电量和音乐状态。 小红书
作者后来把源码和复刻步骤开源到GitHub,仓库名 ljzqp/waveshare-esp32-s3-rlcd-4.2-ai-dashboard,教程帖标题就叫“5 万人看过的AI桌面小屏教程来了”。 小红书
真正值得抄的是它的架构:Mac负责取飞书、天气、音乐、AI状态,画成一张400×300的黑白图,ESP32只负责联网把这张图拉下来显示。改样式、换数据源大多只动电脑端,不用一直折腾硬件,板子这边几乎没有计算负担。 小红书
同一块板,知乎有人拿它做行情和K线,三分钟拉一次数据,够“不用掏手机出来看,偶尔瞟一眼”。小红书上还有适配好的AI额度看板,作者的评价是它“很适合拿来做一块常驻桌面的AI状态屏”。 知乎 小红书
这类东西的共同点是:24小时常亮、摆在光线充足的桌面、内容几秒才变一次。全反射屏不刺眼、阳光下清楚、刷新够快,三条正好全踩中。
同一块屏做成掌机就翻车了。B站UP主“锦匠制作”的众筹视频标题是《2026年!没想到有人做了台黑白屏的掌机?》,13.7万播放、3059赞、670条评论,是这波全反射屏里最热的一条。 哔哩哔哩
但评论区很分裂:早鸟半小时就抢光,质疑声也密集——“100元不到的rs36不把它秒了吗”“298就还行,368就算了”。一位玩过Playdate的用户说得更狠,买来一周就出手,理由是“没背光屏幕再优秀也白搭,不实用”。 哔哩哔哩
不是产品做得差,是场景错了。掌机是揣兜里、被窝里、地铁上玩的,而全反射屏的第一前提就是有光。
只吃3.3V,别接5V ,这是点亮教程里写得最重的一句警告。 哔哩哔哩
SPI别贪快 ,超过10MHz容易花屏,社区经验是先压到8MHz; 残影要主动清 ,得定时做一次全屏反相刷新; 灰阶被帧缓存卡死 ,400×300按1bpp算正好15000字节,想上17级抖动灰阶就不够了。 哔哩哔哩
屏脆,还抽奖 :有用户说自己已经压坏两块屏,另一条高赞评论只有四个字——“屏幕抽奖,慎买”。 哔哩哔哩
刷新率说句实话:有人拿 树莓派 1A+通过32MHz SPI驱动ST7305,说数据手册标的最大刷新率能到51Hz,但他自己在程序里把tickrate限制到了30。另一位UP主拿4.2寸裸屏想放动画,自己写的程序实测不到10帧,最后放弃。“比墨水屏快”是真的,“流畅放视频”是假的。 哔哩哔哩 哔哩哔哩
功耗也说句实话:官方文案只写了“低功耗、显示效果接近墨水屏”,没有公开待机实测数字。能确定的是,屏省掉的是背光那部分,真正吃续航的是WiFi和喇叭——有人实测ESP32-S3带喇叭的语音摆件,中等音量续航约3.3到4.3小时,最大音量只有2到3小时。想让它常亮一整天,就别让板子干“拉图显示”以外的活。 哔哩哔哩 哔哩哔哩
买 :你要一块24小时常亮的桌面信息屏——会议、天气、行情、NAS状态、AI额度,摆在有光的地方。150元,不刺眼,改起来简单。
别买 :掌机、手表、随身设备,或者要求关了灯也看得见。除非你愿意加前光,那等于自己把背光装回去。
四色版ST7306走的是2bit四色原理,刚有人点亮,做桌搭够用,但驱动资料和成品板都还少,急着上手先等一等。 哔哩哔哩

本文来源:https://post.m.smzdm.com/p/a4q48n8l
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Late on November 17, two videos of reflective displays lit up appeared on Bilibili in one evening: one connected a 4.2-inch four-color panel to an ESP32-S3 and lit all four colors - white, cyan, red, and black; the other swapped the controller of a Chinese spelling machine for a black-and-white reflective panel.
The panel is an RLCD, a fully reflective LCD: no backlight, imaging entirely by reflected ambient light. It first circulated in the eye-friendly phone-modding community, where the most discussed question was what to do at night without light. Only recently has it become a favorite for DIY desktops.
This is the most asked question in the comments. E-ink freezes after one refresh: it uses almost no power at rest, at the cost of slow refresh, ghosting, and grayscale faked by dithering. A reflective LCD stays lit: it is still liquid crystal, and community tutorials already run dashboards, bouncing animations, starfields, and the Game of Life, with frame-rate tests.
There is only one cost, but a fatal one - it emits no light of its own. Turn off the lamp and it becomes a white board. Do not treat it as a better e-ink screen; it is an LCD without a backlight.
The Waveshare ESP32-S3-RLCD-4.2 is the easiest entry: 4.2 inches, 300x400, ESP32-S3 with Wi-Fi and Bluetooth, onboard audio codec, dual microphones, speaker, SHTC3 high-accuracy temperature and humidity sensor, MicroSD slot, RTC interface, and battery charge/discharge management. The official description says it supports AI voice and can be flashed with XiaoZhi.
The price shown in comments is 140 yuan without battery and 150 yuan with it; Xiaohongshu recreation posts put it in the hundred-yuan class.
Bare panels are also available from Lekang Display and Osprey Optoelectronics, from 1.54 to 4.2 inches, driven by the ST7305 (monochrome) and ST7306 (four-color).
There is no shortage of software stacks: u8g2 ports, ESP-IDF drivers, and Linux DRM kernel drivers are all open-sourced, and LCSC's open hardware platform has adapter boards for the ST7305 reflective TFT. But for a first try, go with a ready-made board - the money saved on a bare panel comes back with interest in FPC cables and driver debugging.
A Xiaohongshu post titled People with lots of meetings really need this little screen got 1,046 likes and 891 saves, showing the day's meetings, weather, indoor temperature and humidity, computer battery, and music status.
The author later open-sourced the code and recreation steps on GitHub (repo ljzqp/waveshare-esp32-s3-rlcd-4.2-ai-dashboard), with a tutorial titled The AI desktop small-screen tutorial that 50,000 people have seen.
What is really worth copying is its architecture: a Mac fetches Feishu, weather, music, and AI status, draws a 400x300 monochrome image, and the ESP32 only connects to the network to pull and display that image. Style and data-source changes mostly touch the computer side, so you are not constantly fiddling with hardware, and the board has almost no compute load.
On the same board, someone on Zhihu uses it for market quotes and candlestick charts, refreshing every three minutes, enough to glance at instead of pulling out a phone. Xiaohongshu also has a ready-made AI quota dashboard; the author calls it very suitable as an always-on desktop AI status screen.
These use cases share a pattern: on 24 hours a day, placed on a well-lit desk, with content changing only every few seconds. The reflective LCD is easy on the eyes, clear in sunlight, and fast enough to refresh - hitting all three requirements.
Making the same panel into a handheld goes wrong. Bilibili creator Jinjiang Production's crowdfunding video titled 2026! Someone actually made a black-and-white screen handheld got 137,000 views, 3,059 likes, and 670 comments, the hottest of this reflective-display wave.
But the comments are split: early-bird slots sold out in half an hour, while doubts piled up - wouldnt the sub-100-yuan RS36 crush it, and 298 is okay but 368 is too much. One Playdate owner was harsher, selling it a week after purchase because a screen without a backlight is useless no matter how good, not practical.
The product is not bad; the scenario is wrong. A handheld lives in pockets, under blankets, and on subways, while a reflective display's first prerequisite is light.
It only takes 3.3V, never connect 5V - this is the most emphasized warning in the lighting tutorials.
Do not push SPI too fast: above 10MHz it tends to show artifacts, and community experience suggests starting at 8MHz; clear ghosting actively with a periodic full-screen inverse refresh; grayscale is capped by the framebuffer - 400x300 at 1bpp is exactly 15,000 bytes, not enough for 17-level dithered grayscale.
The panel is fragile and it is a lottery: one user says they have already crushed two panels, and another highly liked comment has only four words - screen lottery, buy with caution.
On refresh rate, honestly: someone drove an ST7305 through a Raspberry Pi 1A+ at 32MHz SPI, saying the datasheet lists a maximum refresh rate of 51Hz, but he limited tickrate to 30 in his program. Another creator tried to play animation on a 4.2-inch bare panel and measured under 10 fps with his own code before giving up. Faster than e-ink is true; smooth video is false.
On power, honestly: the official copy only says low power and display quality close to e-ink, with no published standby measurements. What is certain is that the panel saves the backlight portion, while Wi-Fi and the speaker are what really eat battery - one test of an ESP32-S3 voice ornament with a speaker showed about 3.3 to 4.3 hours at medium volume and only 2 to 3 hours at maximum. To keep it on all day, do not make the board do anything beyond pulling and showing images.
Buy it if you want an always-on desktop information screen - meetings, weather, quotes, NAS status, AI quota - placed where there is light; 150 yuan, easy on the eyes, simple to modify.
Do not buy it for handhelds, watches, portable devices, or if you need to see it with the lights off - unless you are willing to add a front light, which effectively puts the backlight back.
The four-color ST7306 uses 2bit four-color technology and has just been lit up by someone; it is adequate for a desk setup, but driver documentation and ready-made boards are still scarce, so wait if you want to start quickly.