
过去两年,手搓圈的硬通货是便携屏:一块屏、一块驱动板,三五百块搓出4K。但最近翻小红书和B站的DIY板块,风向变了—— 晒的人不再给屏幕接电脑,而是把一块ESP32直接塞到屏幕后面,让屏幕自己"上岗干活" 。
有人用 7.5寸墨水屏加ESP32-S3搓了块桌面仪表盘 :网页端可以拖动布局、选择组件,改完发送到屏幕,摆着看 AI使用额度、拓竹打印进度 等信息。这块屏还带着点半成品气质——作者自己说字体显示还在调优,磁吸分离外壳只是概念。 小红书
但计划是认真的: 硬件BOM、控制程序、ESP固件和外壳模型全部开放,禁止商用 。 小红书
车载玩家搓的是另一味。Dragy本来是个给车测零百、跑圈计时的GPS小仪器,11月初有人发帖: 当我爆改ESP32,手搓一个Dragy平替小屏幕 。这条笔记179个赞、119个收藏,评论区齐刷刷"怎么买?"“开售了嘛”——一个自制项目,硬是被催出了预售的阵仗。 小红书
墨水屏这边更卷:有人拿 微雪ESP32-S3带屏开发板 刷了开源固件CrossMux,搓出一块能看书、背单词、 插着耳机还能听歌 的墨水屏。今天刚发的"词幕"更狠,作者自己写了个开源嵌入式系统Aster,让一块小屏全屏滚动动态歌词。 小红书 哔哩哔哩
这波和搓便携屏有什么本质区别?以前加驱动板,屏幕再香也只是电脑的附庸; 现在屏幕是独立终端,不用管电脑开没开机,它通电就是那个界面 。门槛也跟着换了形状:不再考验你会不会配屏线,而是 考验你敢不敢刷固件 。
所以三盆冷水必须泼在前面。第一, 别把"开源"想成"即插即用" 。翻这几条笔记,"求固件分享"是评论区保留节目,但有人明确禁止商用,有人UI只适合自己用,直接搬运别人的固件搓成品,边界模糊得很。第二, 无线副屏这类新方案还很糙 :有人用开源驱动把电脑画面经WiFi推到一块触摸屏上,作者自己就标注了,目前触摸屏只支持单击、双击、鼠标中键滚动。尝鲜可以,当生产力免谈。第三, 新手别一上来裸屏加飞线 ,直接从带屏的ESP32-S3一体开发板入手,选一个作者还在活跃维护的开源项目跟教程,翻车率能砍掉大半。 哔哩哔哩
一句话总结这波: 三五百块搓便携屏,解决的是"屏幕不够用";一块带屏ESP32开发板加一套开源固件,解决的是"屏幕没人管" 。想要副屏办公,成品便携屏仍是省心之选;想让一块屏替你盯进度、报歌词、记生词——是时候打开固件烧录工具了。
本文来源:https://post.smzdm.com/p/anvmgrg7
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Over the past two years, the hot currency in the DIY community has been portable monitors: a screen plus a driver board, and for three to five hundred yuan you could build a 4K display. But recently, scrolling through the DIY sections of Xiaohongshu and Bilibili, the wind has changed — instead of hooking the screen up to a computer, people now stuff an ESP32 right behind the screen and let the screen 'go to work' on its own.
Someone built a desktop dashboard using a 7.5-inch e-ink screen plus an ESP32-S3: on the web interface you can drag the layout and choose widgets, then send the changes to the screen to display things such as AI usage quotas and Bambu Lab print progress. This screen still has a bit of a half-finished feel — the author himself says the font rendering is still being tuned and the magnetic detachable case is only a concept. Xiaohongshu
But the plan is serious: the hardware BOM, control program, ESP firmware, and case models are all open, with commercial use prohibited. Xiaohongshu
Car enthusiasts are cooking up a different flavor. Dragy is originally a small GPS device for measuring 0–100 acceleration and lap times; in early November someone posted: 'When I heavily mod an ESP32 and hand-build a Dragy alternative mini screen.' This note got 179 likes and 119 saves, and the comment section was uniformly filled with 'How do I buy it?' and 'Is it on sale yet?' — a homebrew project that was practically pressured into a pre-sale frenzy. Xiaohongshu
On the e-ink side it's even more competitive: someone flashed the open-source firmware CrossMux onto a Waveshare ESP32-S3 dev board with a screen, building an e-ink display that can read books, memorize vocabulary, and even play music with headphones plugged in. The 'Lyric Curtain' just posted today is even more hardcore — the author wrote an open-source embedded system called Aster that makes a small screen scroll dynamic lyrics across the full display. Xiaohongshu Bilibili
What's the essential difference between this wave and building portable monitors? In the past, even with a driver board added, the screen was still just an appendage of the computer; now the screen is an independent terminal — you don't care whether the computer is on or off, once powered it shows that interface. The barrier to entry has changed shape too: it no longer tests whether you can wire up a screen cable, but whether you dare to flash firmware.
So three doses of cold water must be poured up front. First, don't treat 'open source' as 'plug and play'. Scroll through these notes and 'please share the firmware' is a regular feature of the comment sections, but some people explicitly prohibit commercial use, and some UIs only suit the author's own use — directly copying someone else's firmware to build a finished product is a very blurry boundary. Second, new solutions like wireless secondary screens are still rough: someone used an open-source driver to push a computer's display over WiFi to a touchscreen, and the author himself noted that the touchscreen currently only supports single-click, double-click, and middle-mouse scrolling. Fine for trying out, out of the question for productivity. Third, beginners shouldn't start with a bare screen plus flying wires — start directly with an all-in-one ESP32-S3 dev board with a screen, pick an open-source project that the author is still actively maintaining, and follow the tutorial; that can cut your failure rate by more than half. Bilibili
One sentence to sum up this wave: spending three to five hundred yuan on a portable monitor solves 'not enough screens'; an ESP32 dev board with a screen plus a set of open-source firmware solves 'no one is managing the screen'. If you want a secondary screen for office work, a finished portable monitor is still the worry-free choice; if you want a screen to watch progress, report lyrics, and record vocabulary for you — it's time to open the firmware flashing tool.
本文来源:https://post.smzdm.com/p/anvmgrg7
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。